Tout savoir sur le fameux backwash!

Everything you need to know about the famous backwash!

When you think of a swimming pool, you inevitably think of backwashing, or backwashing in French. Indeed, most pool filtration systems use sand to trap impurities. Given that the pool filter is largely responsible for keeping the water clear and clean, it is essential to clean it regularly. We explain everything to make your life easier!

What is backwashing?

As the name suggests, backwashing means reversing the direction of the water flow through the filter. It is an important maintenance operation for pool care, used to clean the sand filter, which is responsible for trapping debris and particles in the pool water. Over time, the filter accumulates dirt, which reduces its efficiency in keeping the water clean.

When should you backwash?

How often you need to backwash depends on several factors, including the size of the pool, its usage, and the water quality. It is important to backwash when required. According to Sima experts, you should expect to backwash every three to four weeks, and more frequently during periods of heavy use, heavy rain, or in the spring when opening the pool. This will ensure that you enjoy healthy, clear water at all times!

To avoid wasting water and adding extra chemicals , only backwash when necessary.

Here are a few signs to watch for to determine when you need to backwash:

Filter pressure: Most pool filters are equipped with a pressure gauge. When the reading exceeds the normal pressure by 5 to 10 psi, it is time to backwash!

Water flow: If you notice that your pool's water flow is decreasing, the filter may be clogged and the water may not be circulating properly. Backwashing can solve this problem by removing debris from the filter.

Water quality: If your pool water becomes cloudy, green, or contains suspended particles, it may indicate a filtration problem. Backwashing will help remove unwanted particles and improve water clarity.

The 8 steps to backwash:

  1. Install the drain hose at the head outlet and unroll it completely.
  2. Turn off the pump and set the filter handle to the Backwash position.
  3. Turn the pump back on and let the filtration system run until the water flowing through the clear bubble becomes clear again, about 2 minutes.
  4. Turn off the pump and move the handle to the Rinse position.
  5. Turn on the pump and let the filtration system run for 1 to 2 minutes.
  6. Turn off the pump and set the handle to the Filter position.
  7. Turn the pump back on.
  8. Add water as needed: once backwashing is complete, the pool water level may have dropped.