Une eau parfaite en 5 étapes!

Perfect skin in 5 steps!

By following these few steps, you will enjoy beautiful, crystal-clear water throughout the season that will make your neighbors jealous!

Step 1: Opening

You must first start your pool properly in the spring. It is recommended to do so as soon as the water has completely thawed. Once the filtration system is connected, raise the water level in the pool and then start the pump to begin circulating the water.

Remove as much debris as possible by vacuuming (vacuum head attached to the telescopic pole connected to the skimmer suction using a hose). If you have a sand filter, you must set your filter valve to the waste position during this operation. Add water as needed. It is important to run the system for at least four hours before taking a water sample for testing. If you are unable to do so immediately, add chlorine.

Your Sima specialist can recommend an opening kit suited to your needs. The kits sold in our specialty stores are 100% soluble and leave no residue. The water will be blue and clear in 24 to 48 hours.

Step 2: Balancing

Balancing the water is an important step in maintaining its quality. Balancing the pH, alkalinity, and hardness helps protect your equipment, makes the water comfortable for swimmers, and allows your sanitizer to perform well. Once the parameters are properly balanced, adding a stabilizer will protect against chlorine loss due to UV rays.

Step 3: The maintenance program

There are several types of sanitizing products for weekly maintenance, depending on your needs, swimming habits, and schedule. Granular chlorine must be added every evening, while tablets are used 2 to 3 times a week. To ensure you always have clear water, follow your sanitizing routine and perform a home test every morning.

All-in-one kits (Kool Kit) to be used once a week are a good solution to help you maintain water quality. Designed to make your life easier, they have the advantage of always maintaining the same level of product circulating in the water. What's more, if you go on vacation, you won't lose your water!

Have your pool water tested once a month by your Sima specialist. Don't forget to bring the list of products you have at home as well as the approximate quantities.

You must also keep your pool very clean. Clean the walls with a brush designed for this purpose, which will allow dirt to be filtered and prevent algae growth.

Step 4: Filtration and circulation

Filtration and circulation are essential. It is therefore not recommended to completely turn off the pump, as the products must circulate to be effective. Also be sure to backwash as needed to optimize filtration performance and clean the cartridge if you have a cartridge filter.

Step 5: Closing

Final tip for preparing for the next season: close your pool as late as possible. The weekend of Thanksgiving is generally a good time. If you do it too early, the water will be difficult to restore in the spring. What's more, if it rains a lot, the water level will be too high, which can be critical for your pool during the winter. Perform a water analysis to balance it and use the closing kit recommended by your Sima specialist. It is also recommended to perform a treatment designed to clean your sand or cartridge in order to remove dirt and grease.