Tout savoir sur le système de filtration de votre piscine!

SWIMMING POOLS

How does a sand filtration system work?
Your pool filtration system includes a pump and a filter. The filter is essential for the health of your pool! It keeps your water clean and clear, as well as trapping debris and dirt that accumulate. A well-maintained system will prolong its lifespan, saving you from repairs. Plus, you'll have a clean pool all season long!

How to properly use your sand filter according to your pool's needs

It is recommended to run the pump for 8 to 12 hours a day during the peak season. It not only filters your water, but also ensures proper circulation, which allows chemicals to disperse properly, prevents algae growth, and keeps the water clear!

Your sand filter has 7 main functions. Here is what they are used for:

  1. Filtration: This is the main function. Water is drawn in, passes through the sand which traps impurities, and then returns clean to the pool. When the pressure is 5 PSI higher than normal, it is time to backwash.
  2. Backwash: This function cleans the sand in the filter. Water flows in reverse to dislodge accumulated dirt, which is then sent down the drain through the waste hose. Continue until the water is clear (1 to 2 and a half minutes). It is important not to forget to put the waste hose in place!
  3. Rinse: After backwashing, the rinse function settles the sand and removes the last residues from the filter before returning to filtration mode.
  4. Waste: Allows you to drain the pool water without passing it through the filter. This function is often used to lower the pool water level or to drain very dirty water (to avoid clogging the filter). Stop when the water level has returned to normal.
  5. Recirculate: Water circulates through the pump and returns to the pool without passing through the filter, which is useful for mixing the water during chemical treatments without clogging the filter. Remember to clean the bottom of the pool before using this function.
  6. Winter: It protects the seal during the winter.
  7. Closed: This function stops water circulation in the system; it is used during certain maintenance tasks.

Notes: 

– It is important to note the baseline pressure of your filter during its first use. It will serve as an indicator to know when to backwash.

– Remember to always stop the pump before changing the function! This prevents damage to the seal from changing water pressure. 

The importance of backwashing: regular maintenance is essential. 

Is your water cloudy or is your filter pressure higher than normal? It is time for a backwash! This is why it is important to note the PSI indicated on your filter. When it shows 5 to 10 PSI more, it is time to put your sand filter in backwash mode. But why? 

  1. Remove dirt accumulated in the sand (dust, debris, oils), often brought in by swimming or weather conditions. 
  2. Restore optimal water flow in the filtration system. Accumulated debris can slow down the flow of water circulation in your pool! A clean filter keeps your pool clean!
  3. Improve the quality and clarity of the pool water.
  4. Prolong the lifespan of the filter and the pump. A filter that is clogged too often makes your system work harder. Regularly cleaning the sand will help extend its lifespan.

After backwashing, remember to put your system in "rinse" mode before returning it to filtration mode, in order to settle the sand and prevent residues from returning to the pool.